Wooden Cooling Tower
NCTPL is the leading manufacturer of wooden cooling Towers in cross flow and counter flow type with high mechanical strength, durability and efficiency. The structure is made of Chemical treated wood with MSHDG/SS hardware and ACB/FRP casing in Direct and gear driven type.
Product Description
Wooden Cross Flow Type Cooling Tower is available in single Cell Cooling Capacity from 100 TR to 2000 TR. Our range of Cross Flow Type Cooling Tower including SFID (Single Flow Induced Draft) and DFID (Double Flow Induced Draft) Cooling Towers. In Cross Flow Type Cooling Tower the water flows vertically through the fills while the air flows horizontally across the flow of the falling water. Because of this, air does not have to pass through the distribution system, permitting the use of gravity flow hot water distribution basins mounted at the top of the unit above the fills.
Motors are located outside the fan cylinder at the fan deck, connected to the speed reducer by a tubular stainless steel, dynamically balanced driveshaft equipped with neoprene flexible coupling elements.
A galvanized oil gauge and drain line are provided from the gear reducer to the vicinity of the motor, and are equipped with a dip stick for oil level measurement.
Mechanical Equipments : Provided Fan(s) are propeller-type, incorporating heavy duty blades of FRP, with individually adjustable Blades. Fan(s) are driven through a right-angle, industrial-duty, oil-lubricated, geared speed reducer that requires no oil changes for the first three (3) years of operation.
Motors are located outside the fan cylinder at the fan deck, connected to the speed reducer by a tubular stainless steel, dynamically balanced driveshaft equipped with neoprene flexible coupling elements.
A galvanized oil gauge and drain line are provided from the gear reducer to the vicinity of the motor, and are equipped with a dip stick for oil level measurement.
